1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 317Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 317

Power Supply Troubleshooting Before beginning this procedure: Charge battery and connect battery cables Turn key switch OFF,
V1check red wire between terminal strip and relay bracketIf red wire is OK, check black wire between relay bracket and engine
ground If voltage at V1, go to Step 5 5Connect voltmeter black lead to clean engine ground, and voltmeter red lead to V3
(bluewhite) m 6Push control box UP trim button If no voltage at V3check control box trim switch and wiring, and go to Step
If voltage at V3go to Step 7DR3950 m 7Push lower motor cover UP trim button If no voltage at V3check for voltage at bluewhite
bullet connector out of lower motor cover trim switchCheck for voltage at redpurple connector that supplies lower motor cover