1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 318Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 318

OJ rn 9Push UP trim button and check for voltage at V4 (blue) on relay blade (M terminal of relay) If no voltage at V4, go
Connect voltmeter black lead to clean engine ground, and voltmeter red lead to V7 (greenwhite)15Push control box DOWN trim
button If no voltage at V7, check control box trim switch and wiring, and to to Step 16 If voltage at V7, go to Step 16 OJ
16Push lower motor cover DOWN trim button If no voltage at V7, check for voltage at greenwhite bullet connector out of lower
motor cover trim switchCheck for voltage at redpurple connector that supplies lower motor cover switch If voltage at V7,
go to Step 1717Reinstall DOWN relayPush blades only halfway into bracket in DOWN (green) end of bracket 18Push DOWN trim
button and check for voltage at va (green) on relay blade (M terminal of If no voltage at va, go to Relay Ohmmeter Test If
voltage at va, go to Step 1919Disconnect trim motor's blue and green power wire connector (leave relay in bracket)20Push