1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 37Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 37

Synchronization and Linkage Adjustments I Note It is important that this step-by-step procedure be followed in sequence and
center portion until it contacts the No.1 piston Lock the tool in place with its ringII 5While holding the piston firmly
against the tool, mark the timing wheel directly across from the pointerConsider this mark A" 6Continue to turn the crankshaft
in clockwise direction until piston contact is felt againMark this exact spot on the timing wheel and consider this mark
"8"Remove the piston stop tool rn Useand "8" Mark the midpoint onthe midpointthe timing the molded-in marks to find between
marks A" the rim of wheelConsider this markC"If mark "C" and the cast-in TDC line are in agreement, timing pointer alignment
is correctIf not, proceed to Step 8 8Turn the crankshaft clockwise to align the mark "C" with the pointerHold the crankshaft
in this positionLoosen the pointer screw and move the pointer to align with the cast-in TDC mark on the timing wheelTighten