1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 59Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 59

Increase water level until "X" dimension is 25 in(630 mm)Water must begin to run through valve before reaching 25 in(630
fuel pressure stabilizes, the pressure gauge must not indicate less than PSI (21 kPa) when held level with VRO hose fitting
If pressure is less than PSI (21 kPa), test pulse hose and crankcase fittingRefer to VRO Component Servicing, this section
If pulse hose and crankcase fitting are good and pressure is less than PSI (21 kPa), replace pump In-Line Fuel Filter Servicing
Replace the fi Iter element every 100 operati ng hou rs or once each season, whichever comes first rn 1Loosen the fuel filter
nut and remove the element2Clean all parts of the filter assembly with mild aerosol solvent and blow dryDo not dry parts
with cloth as lint might stick to the parts and clog the passagesDissolve any gummy deposits with OMC Cleaning Solvent Vacuum