1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 64Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 64

Component Servicing rt:i=J Anytime the VRO oil supply line has been disconnected from the engine, you must run 50: fueloil
oil hose from pickup assembly and from engine oil inlet fitting Use low pressure air to purge hose of oil Use cap holder,
PIN 329661to plug pickup end of hose Attach vacuum tester to the engine end of oil line and draw inHg vacuum The oil system
is good if it can maintain inHg vacuum for at least five minutesBefore installing pickup assembly, check pickup height1.8
gallon pickup6.9 0.06 in(174 1,5 mm) 3.0 gallon pickup8.8 0.06 in (224 1,5 mm) Pump For function tests of the System, this
section pump, refer to Testing Fuel To verify oil consumption and proper fueloil ratios: 1Avoid accidental starting of engine
while changing propellers; twist and remove all spark plug leadsThen, install the proper test propeller, and put the engine