1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 86Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 86

40 4Install the primer hose to the intake manifold5Install the hose to the balance tube !] 6Install and secure the main fuel
the needle adjustment 2Start the engine and allow it to reach normal operating temperatureRun the engine in FORWARD gear
at the specified idle speed for three minutes: If the adjustment is too lean, the engine will sneeze and backfire, go to
Step If the adjustment is too rich, the engine will be rough and unsteady, go to Step 4 3If the adjustment is too lean, notice
your reference mark and turn the needle '8 revolution counterclockwiseWaiting 15 seconds after each adjustment, repeat this
procedure until you reach the highest consistent RPM4If the adjustment is too rich, notice your reference mark and turn the
needle 1fs revolution clockwiseWaiting 15 seconds after each adjustment, repeat this procedure until you reach the highest