1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 88Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 88

Disassembly 1Remove the two screws per leaf plate assembly, and remove the leaf plate assemblies as requiredINotel Do not
smooth and free of nicks Use machinist's straightedge to check flatness in all directionsSurface must be flat, 0.004in(0,10
mm)All manifold components must be clean before assemblyDo not use strong carburetor cleaner or hot soaking tankAssembly
1sl1Place leaf valves on leaf plateIf new valves do not seat on the leaf plate, turn the leaf valves overUsed leaf valves
must not be turned over for reuseLeaf valve may break, causing serious powerhead damage2If any leaf valves are standing open,
apply light pressure using pencil eraserIf leaf valve closes with light pressure, valve is acceptableIf not, inspect leaf
plate for high spots or burrs; Do not lap leaf platesIf plate is too smooth, the leaf valves may stick closed after off-season