1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 89Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 89

5Assemble leaf valve shim (if required) and leaf stopInstall two screws near center of leaf stopDo not tightenr;Q1 6Hold
leaf valve9After leaf valve is positioned properly, install remaining screwsTighten all screws evenly to torque of 25-35
inIbs(3-4 Nm)Installation r:J3l 1Install seal onto the intake manifold Do not use sealer on the seal1141 2Remove old adhesive
rom threads of the leaf plate retaining screwsPrime the threads with OMC Locquic Primer and let ryApply OMC Nut Lock to threadsPosition
the leaf plate assembly and install the screwsTighten the screws to torque of 25-35 inIbs(3-4 Nm) 3Position the intake manifold