1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 108Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 108

Ignition Coils and Power Pack Servicing Removal 1Remove the rectifierregulator cover and ignition coverDisconnect the timing
washerand power pack ground lead on the bottom port ignition coil screwInstall screw finger tight Place lock washer and flat
washer on bottom starboard ignition coil screw and install the screwTighten both ignition coil screws to 50-95 inIbs(5,6-10,7
Nm) 3Connect the primary leads and spark plug leads to the bottom ignition coil4Repeat Steps and for the remaining ignition
coils 5Carefully install both Packard connectors 6Connect the timing sensor plugInstall the rectifierregulator cover and
ignition cover INote After replacing any major ignition component, verify correct maximum spark advance using the procedure