1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 127Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 127

STEPCHARGE COIL TEST, V4 MODELS Ground Test 1Disconnect the starboard side Packard connector between stator and power pack2Attach
If meter shows 250 volts or higher, go to next step indicated in Troubleshooting Sequence Chart, Page 3-24 If meter shows
less than 250 volts, check condition of wiring and connectors If wiring and connector condition is good, go to Ohmmeter TestOhmmeter
Test INotel All ohmmeter tests must be performed with engine NOT running 1Calibrate ohmmeter on appropriate scale2Connect
meter between stator brown and brownwhite leads: Meter must show 1100 100 ohms 3To test for grounded condition, connect ohmmeter
black lead to clean engine ground Alternately connect ohmmeter red lead between brown, brownwhite leads: Any needle movement