1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 128Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 128

STEPCHARGE COIL TEST, V6 MODELS Ground Test 1Disconnect the starboard side connector between stator and power pack2Attach
attached to brownwh ite stator lead: If meter shows 150 volts or higher, go to next step indicated in Troubleshooting Sequence
Chart, Page 3-24 If meter shows less than 150 volts, check condition of wiring and connectors If wiring and connector condition
is good, go to Ohmmeter TestOhmmeter Test INotel All ohmmeter tests must be performed with engine NOT running 1Calibrate
ohmmeter on appropriate scale2Connect meter between stator brown and brownyellow leads: Meter must show 550 55 ohms 3To test
for grounded condition, connect ohmmeter black lead to clean engine groundAlternately connect ohmmeter red lead between brown,
brownyellow leads: Any needle movement indicates charge coil or leads are grounded Locate and repair ground, or replace stator