1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 150Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 150

7Lubricate new lower housing O-ring with OMC TripleGuard grease and place the O-ring on the lower housing [] 8Lubricate seal
to notice that the connecting rods have top and bottom diagonal oil hole will always face the flywheel[] 11Apply OMC Needle
Bearing Grease to the 28 wrist pin bearingsInstall the bearings in the wrist pin boreAlign the bearings in the bore using
OMC Wrist Pin Bearing Tool, PIN 336660 [1Q] 12Place the two wrist pin thrust washers on the tool with flat side of the washers
facing out13Support the piston in OMC Piston Cradle, PIN 326572, with bottom wrist pin hole facing downOil the wrist pin