1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 153Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 153

12311241 frame 31Secure restraining jaw "C" and forcing jaw liD" to 32Tighten the rod cap screws to torque of 25-30 inIbs(2-3
rodThe groove lines on the jaws must be centered on the rodcrankpin diameter 1Note The above procedure must be followed to
assure frame is squarely in position 34Tighten the forcing screw to torque of 23 inIbs(2,5 Nm) 35Loosen both rod cap screws
turn 36Apply preliminary torque of 40-60 inIbs(5-7 Nm) to both rod cap screws 37Apply final torque of 30-32 ftIbs(40-43 Nm)
in two alternate increments to both rod cap screws 38Loosen forcing screw and remove the frameRepeat Steps 32 thru 37 for