1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 154Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 154

40Apply OMC Locquic Primer to the mating flange of the crankcase and let air dry 41Apply OMC Gel-Seal II sealant to the crankcase
cannot be determinedUsing old OMC Gel-Seal II sealant could cause crankcase air leaks 42Thoroughly clean upper seal area
ofthe crankshaftPlace new upper seal on crankshaftDo not apply sealer to outside diameter of the seal 43Lower the crankcase
into place 44Install the main bearing screws finger tightTwo shorter screws on bottom end45When the crankcase is seated,
install and firmly seat the crankcase taper pin 1351 1361 46Torque main bearing screws in stages to 31-35 ftIbs142-47 Nm)Begin