1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 155Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 155

Installation 1Apply Permatex No.2 gasket sealant to inner exhaust housing flange2Install new base gasket on adapterCoat both
mount screws to 100-105 ftIbs(136-142 Nm)Do not reverse the screws when retorquing them 6Apply OMC Gasket Sealing Compound
to the threaded portion of the powerhead to exhaust housing screwsLoosely install all fasteners7Torque the six large screws
retaining the powerhead to the exhaust housing to 18-20 ftIbs(24-27 Nm) 8Torque the five small screws retaining the powerhead
to exhaust housing to 60-84 inIbs(7-9 Nm)order to achieve proper sealing and prevent gasket damage, the powerhead mounting
screws must be retorqued after engine has reached operating temperature and has been allowed to cool INote In []]9Engage