1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 193Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 193

COA3149 12Reach inside the gearcase and remove the pinion and pinion nutRemove any loose needle bearings that might interfere
and remove it from its groove by unwrapping it from around the clutch dogDiscard the spring16Push the pin out of the clutch
dogThe bearing housing assembly will now pullout of the end of the propeller shaft, and the clutch dog will slide off the
splines15 COA3561 rrru 17Pull the forward housingthrust bearingand thrust gearwasher off the bearing 18Push down on the detent
lever to make sure it's in the most depressed positionLift out the shift shaft and cradle Q) 19Pull up on the detent lever
until it snaps into NEUTRAL positionPush the pivot pin out of the housing, then reach inside and pull the shifter Q) off