1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 197Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 197

5Lightly apply OMC Triple-Guard grease to new a-ringInstall the a-ring in top groove of the bearing housing INote Do not
V6to dimension shown Driveshaft Shimming Using Tool, PIN 393185 The driveshaft pinion is precisely meshed with the forward
and reverse gears by using one or more shims between the driveshaft bearing housing and the thrust washerWhen installing
new thrust bearing or washer, bearing housing, pinion, or driveshaft, it is necessary to properly shim the assembly to restore
factory clearanceGauge bars are precision made and should be handled carefullyThe length of each bar is stamped near the
part numberThis dimension is 0.020 in(0,508 mm) shorter than the actual shimmed length of the driveshaftDR461 0 INote Degrease