1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 200Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 200

6Use one of the following methods to install the water intake screen Drop it into the water intake cavity, and push it down
25 needles with OMC Needle Bearing Assembly Grease and place in the bearing case[] 10Face the narrow arms of the shifter
toward the housing, then reach inside and attach it to the detent leverAlign the pivot holes and insert the retaining pin[11
Push the detent lever down to its most depressed positionRest the cradle on the shift shaft (f), then attach the cradle and
shaft to the wide arms of the shifterPull the detent lever back up to NEUTRAL position to hold the cradle and shaft in place[]
12Coat thrust bearing and thrust washer with OMC Needle Bearing Assembly GreasePlace the bearing on the back of the forward
gearSet the washer on top of the thrust bearingInsert the gear, bearing, and washer assembly into the bearing housingBe careful