1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 208Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 208

8Pull up on the driveshaft to remove it from the gearcaseThe driveshaft to pinion taper is locking taperIf necessary, use
any loose needle bearings that may have fallen into the gearcase11Push down on the shift rodThis will move the detent lever
downward to clear the inside of the gearcase when the propeller shaft assembly is pulled out [!Q] 12Completely unscrew the
shift rod, but do not pull it out of the shift rod coverRemove the six cover screws, then lift off the shift rod and cover
assemblyDiscard the gasket underneath [g] 13Reach into the shift cavity with suitable tool and depress the detent leverWhile
holding the detent lever down, pull the clutch shaft and bearing housing assembly out of the gearcase INote If the detent