1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 212Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 212

29 31957 11If removed, install new forward gear bearingApply OMC Needle Bearing Assembly Grease to 25 new rollersInstall
so the indicator needle makes contact with the flange on the housingThe indicator needle must be parallel with the side of
the gear housing and perpendicular to the table surfaceZero the dial indicator1341 19Grip the bearing housing 180 apart and
pull up to get reading on the indicatorTo determine thickness of shims; use the following example: 0.030 inof shims in the
assembly0.020 inyour reading on the dial indicator + 0.001 innecessary end play 0.011 inrequired shims 1321 20Remove the
0.030 inof shims from the assemblyReassemble the gear assembly using combination of shims to achieve the required thicknessApply