1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 214Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 214

28Install new seal in the bearing housing using OIVIC Seal Installer, PI 341439Apply oil to the casing of the seal before
Assembly Grease to the thrust washer Place washer in recess of bearing housing32Coat bearing surfaces of propeller shaft
with gearcase oilSlide the propeller housing on the propeller shaftUse caution when assembling the propeller shaft in the
bearing housingThrust bearing must remain around shoulder on the propeller shaft DRC5720 33Lightly oil the threads of the
forward gear assemblyCarefully start the threads into the housing, and screw it in by hand as far as possibleTighten the