1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 216Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 216

Driveshaft Shimming Using Tool, PIN 393185 The driveshaft pinion is precisely meshed with the forward and reverse gears
prior to assembly[]J 1Assemble the driveshaft bearing housingthrust washerthrust bearingand pinion onto the driveshaftUse
OMC Driveshaft Seal Protector, PIN 318674, whenever installing or removing the bearing housingLightly coat the threads of
the pinion nut with outboard lubricant and torque to 70-80 ftIbs(95-108 Nm) 2Select the correct gauge and collar: use OMC
Gauge, PIN 328367, and OMC Collar, PIN 3414403Slide the collar onto the driveshaft with large end in contact with the bearing
housing W [IQJ 4Insert the assembled driveshaft into the tool base and tighten preload screw against the driveshaft until