1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 218Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 218

Assembly Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable condi
installation of the pinion bearing in the gearcase drastically reduces the life of the bearingThe bearing is tapered so that
when installed correctly, its shape compensates for stresses in the gearcase and allows full bearing contactWhenever gearcase
is disassembled, the pinion bearing should be checked to ensure that it has been installed with the lettering facing up 4Insert
the tool with the bearing into the gearcaseDrive the bearing into the gearcase until the washer on the tool contacts the
spacerRemove the toolUsing rag, remove any excess grease from surface of the needle bearings 5Seat pinion bearing retaining
ring Q) in groove on top of the bearing6To install the water intake screen, drop it into the water intake cavity, and push