1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 221Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 221

113l 17Press detent lever down to engage REVERSE (lowest) positionDoing so will provide clearance to install the clutch shaft
the O-rings into the shift rod cover 21Place the shift rod grommet and spacer on the shift rodGrease the threaded end of
the shift rod and insert it through the coverTurn the shift rod while pushing it through the cover to avoid damaging the
O-ringsnew shift rod cover gasket Position the gasket on the gearcaseThread the shift rod into the detent lever about four
turns 1181 22Apply OMC Gasket Sealing Compound to both sides of a 23Move shift rod from side to side while pushing on the
clutch shaft to ensure proper alignment of the bearing housing locator pin into the locator pin hole in the gearcase 24Apply