1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 222Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 222

120 25 Position the driveshaft thrust bearingthrust washerand shim(s) (selected earlier) on the driveshaft 1201 iNote Position
taper and install the driveshaftTurn the gearcase right side upLightly coat the threads of the pinion nut with outboard lubricant
and install on the driveshaft using OMC Pinion Nut Starting Tool, PIN 342216Turn the driveshaft by hand to engage the nutRemove
the pinion nut starting tool before applying torque to pinion nut 31Using OMC Driveshaft Holding Socket, PIN 331875, OMC
Pinion Holder PI 334455, and OMC Wrench Retainer, PIN 341438, torque the pinion nut to 70-80 ftIbs(90-108 Nm) INotel 1251
Overtorquing or undertorquing the pinion nut will reduce pinion lifeDo not reuse damaged pinion nuts 32 Position the washers