1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 228Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 228

Bearing Housing Assembly Servicing 1Remove water pump assembly from jet housing OJ 2 3Remove retaining ring with retaining
the impeller end ofthe driveshaft until the seal carrier is free from the housingContinue to press bearings and driveshaft
from bearing housing8If seals are damaged, the carrier and seals are serviced as an assemblyApply OMC Triple-Guard grease
to seal lips before reinstalling the carrier and seal assembly[] 9To replace the bearing housing seal, remove inner seal
retaining ring with knife blade or thin-blade screwdriverLift tang of retaining ring, and raise retaining ring in circular
motion until it has been removed rn 10Using punch, drive out the inner seal and discard 11Remove the outer seal retaining