1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 229Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 229

[] 13To assemble inner and outer seals to bearing housing, install outer seal retaining ring into its groove in the bearing
slightly smaller than the outside diameter of the sealWhen the seal is seated, install the inner retaining ring 16Remove
the seal carrier assembly and thrust washer from the driveshaft 17Remove the retaining ring with retaining ring pliersWear
safety glasses and proceed with care to avoid unsnapping the ring from the pliers18Inspect driveshaft bearings in placeIf
the bearings are removed for any reason, they must be discardedTo remove, press bearings off driveshaft from impeller end