1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 236Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 236

[]] rn 9Assemble remaining shims, new tab-lock washer, and impeller nut onto driveshaftTorque impeller nut to 16-18 ftIbs(22-24
handle to NEUTRAL detent 2Hold reverse gate up and check for proper clearance between reverse gate and water flow passage:
132 in(11,9 mm) 3If adjustment is required: Loosen cam screw Rotate cam eccentric nut while holding reverse gate up, until
proper clearance is achievedTighten cam screw and recheck adjustment4Move remote control handle to FORWARD detent[] 5When
the roller is in FORWARD position CD, apply hand pressure to move the reverse gate up, toward NEUTRALIf properly adjusted,
reverse gate should not move toward NEUTRAL6If gate can be moved toward NEUTRAL, readjust eccentric to hold reverse gate