1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 253Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 253

18 Assembly INote If removed, apply OMC Locquic Primer and OMC Screw Lock to the brush card screws before installing1Place
and slide putty knife out, making sure the brushes are retained properlyInstall thrust washer, and align and place end cap
onto armature shaft7Apply OMC Locquic Primer and OMC Screw Lock to the threaded portion, and install the two thru boltsTorque
to 50-60 inIbs(5,6-9 Nm)Lightly coat the pinion with OMC Triple-Guardgrease and install on the armature shaftInstall the
retaining ring with external retaining ring pliers9Attach solenoid with bracket to starterAttach solenoid strap to starter