1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 273Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 273

NO OIL Circuit 1Separate the VRG pump 4-pin Amphenol connector[] 2Using jumper wire, connect the engine harness tan yellow
CHECK ENGINE light should turn on as the vacuum approaches the switch preset limitRefer to the chart below for the values
on your vacuum switch Vacuum Switch Housing Color GRAY BLACK Limit (inHg) PCE0063 If the CHECK ENGINE light does not turn
on, disconnect the vacuum switch 2-pin connectorConnect the two terminals in the engine harness connector together with jumper
wire If the CHECK ENGINE light turns on after connecting the two terminals together, repair or replace the vacuum switch
If the CHECK ENGINE light does not turn on after connecting the two terminals together, troubleshoot the tanorange and black
circuits for an open in the engine harness or the instrument harness4Turn the key switch OFF and reconnect all circuits disconnected