1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 43Get this manual

1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 43

Synchronization and Linkage Adjustments 9.9 thru 15 INote It is important that this step-by-step procedure be followed in
it with the throttle leverInstall the retaining pinThe throttle cable bracket must be flush with the inside edge of the threaded
cableTo adjust, remove screw and turn bracketInstall screw 2All ModelsClose the throttle completely so the idle speed screw
is against the stopThe center of the cam follower roller should be halfway between pick-up mark and end of the throttle camTo
adjust, advance the throttle to wide open position and adjust idle speed screwTurn the screw in to move the cam closer to
the roller and out to move cam away from the rollerClose the throttle completely and check the cam to roller alignmentRepeat