1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 48Get this manual

1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 48

Synchronization and Linkage Adjustments - INote It is important that this step-by-step procedure be followed INote If equipped,
to the throttle shaftSlide the adjustment lever up or down to make the adjustmentThrottle Control Rod [[] INote Offset on
pivot block must face toward the control rod collar [] 1While rotating the propeller shaft, move the shift lever to FORWARDLoosen
the control rod collar screw[] 2Advance the throttle lever until it contacts the stop on the cylinder block3Move the throttle
control rod forward until the carburetor throttle plate is horizontal rnpivot blockTighten the collar screw securely.until
it touches 4Move the control rod collar backward the []] 5Check your adjustmentThe carburetor throttle plate must be exactly
horizontal when the throttle lever is fully advancedIf necessary, repeat Steps thru 4Maximum Spark Advance INote Ru the eng
ne with the proper test wheelDo not ru the engine with propeller or flushing adapter for the adjustment1Connect timing light