1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 52Get this manual

1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 52

Shift Cable9.915 []] 1Extend shift cable and lubricate with OMC Triple-Guard grease & Before connecting shift cable: on remote
inIbs(7-9 Nm)8Slip rubber grommet onto control cables and press grommet into groove in lower engine cover9Inspect installation
to ensure that the control cables are attached to the proper engine levers by lifting the fast idle lever, if equipped, to
the START positionIf correctly attached, the throttle cable and engine throttle lever will moveShift Cable20 thru 30 1Place
engine's shift lever in NEUTRAL position(Propeller shaft will turn freely when in NEUTRAL position 2Check that remote control