1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 92Get this manual

1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 92

7Check for correct positioning of float levelFloat level controls the height of fuel in the float chamber and is critical
valve into seat8Check for correct float drop dimensionThis dimension affects the full opening of the inlet needle and is
critical to correct operation of the carburetorWith carburetor body in normal running position, the float must drop open
to dimension shownTo adjust, bend tab on float arm where tab contacts float seat[] Base of carburetor body Bend float lever
tab to achieve proper dimension into in(28-41 mm) _,L-803406 9Install float chamber and new gasket10Apply OMC Locquic Primer
and OMC Screw Lock to the threads of four float chamber screwsInstall the screws and torque in an "x" pattern to 25-35 inIbs(2,8-4,0