1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 116Get this manual

1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 116

Ignition Plate Servicing9.915 Removal 1To avoid accidental starting of engine while servicing, twist and remove all spark
the four support plate screws Install the screws and tighten them to torque of 48-60 inIbs(5-7 Nm)2Apply OMC Moly Lube to
the crankcase boss 3Lubricate the ignition plate bearing groove with OMC Moly Lube [] 4Apply OMC Nut Lock to the threads
of the ignition plate screwsInsert needle-nose pliers into slots in the ignition plate bearing and compress bearing while
guiding the ignition plate into position5Align the ignition plate with the retainer plateTighten the screws to torque of
25-35 inIbs(2,8-4,0 Nm) 6Connect and adjust spark advance linkRefer to Synchronization and Linkage Adjustment, Section 17Check