1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 121Get this manual

1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 121

1012 in(26,7 cm) DRC625 1 3Attach engine harness tan lead to clean engine ground If engine slows to approximately 2000 RPM,
_ Blocking Diode Test OJ The diode is located in the engine harness tan wire circuit at position 1Disconnect engine harness
6-pin Deutsch connector that contains the tan wire 2Disconnect temperature switch tan lead 3Calibrate ohmmeter on appropriate
scaleUsing jumper wires, connect meter between engine harness tan lead and engine harness 6-pin connector terminal "6"Note
reading4Reverse meter connections or press "polarity" buttonNote reading very high reading (00in one direction and low reading