1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 122Get this manual

1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 122

IGNITION OUTPUT TESTSCD II ill plugs installed and torqued in the cylinder headIf necessary to remove the spark plugs, be
in(51 mm) from any metal surface '" To avoid possible shock hazard, do not handle ignition coils or spark tester during cranking
tests 3If equipped, install the emergency stop switch clip and lanyard assemblyCrank the engineSpark should jump each tester
gap alternately If tester shows good output on both cylinders, go to STEPRUNNING OUTPUT TEST If tester shows good output
on one cyli nder, go to STEPPOWER PACK OUTPUT TEST If tester shows no output, go to STEPSTOP CIRCUIT TESTIt is possible for
the ignition system to have problem but still produce good outputIf the engine "pops" or "backfires" during starting, the