2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 55Get this manual

2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 55

TECHNICAL FEATURES STRUCTUREFUNCTION The GPS for this watercraft consists of the combination meter and the GPS receiverThe
receiver is ready to provide navigational information 2D Navigation The GPS receiver continuously repeats calculation of
the latitude, longitude and altitude when the safety lanyard clip is fitted to the base of the engine stop switchAs result,
the start-up time for determining correct watercraft position after the safety lanyard clip is fitted, varies depending on
when the safety lanyard clip was removed, if the battery was removed and the distance the watercraft was transported with
the safety lanyard clip removedThere are three different conditions as follows; Hot start When the safety lanyard clip is
fitted to the base of the engine stop switch within hours after was removed, the position fix will complete in about 25 secondsWarm
start When the safety lanyard clip is fitted to the base of the engine stop switch more than hours after it was removed,
the position fix '.ill complete in about minutesCold start The position fix will complete within about minutes in the following