2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 88Get this manual

2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 88

MAINTENANCE Make sure the oil OIL LEVEL CHECK PROCEDURE ON CALM WATER Start the engine cap'dipstick Warm up the engine at
the oil filler capldipstick and check for any oil leaks OIL FILLER CAP I- OIL CHANGE Change the oil with the engine warm
to assure complete drainingSecure the watercraft on stand or trailerRemove the seats (page 3-5)Warm up the engine for few
minutes according to the flushing procedure (page 5-3)Turn off the water and stop the engineRemove the oil filler capldipstick
and the engine dipstickPump out the engine oil with commercially available Fluid Evacuator from the oil filler cap hole and
drain pipe cap hole, drain the oil tank and oil panAfter draining the oil completely, install the engine dipstick and pour
the recommended oil (page 4-13) into the oil tank through the oil filler cap holeENGINE DIPSTICK OIL FILLER CAPIDIPSTICK
DRAIN PIPE OIL FILLER CAP HOLE OIL CAPACITY: 4.2 liters (4.4 US qt, 3.7 qt) at draining 4.3 liters (4.5 US qt,3.8 imp qt)