2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 93Get this manual

2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 93

MAINTENANCE OIL COOLER Remove the following: right side panel (page 3-7) anode cap Check the anode retaining screw to be
the screw head, replace with new oneRemove the screw and anodeApply locking agent the retaining screw threads (Coat 6.5 from
tip) and install new anode with the screwReplace the O-ring with new one Install the removed parts the reverse order of removal
BILGE STRAINER Remove the following: seats (page 3-5) rear storage box (page 3-6) BAND Release the bandRemove the bilge strainer
out of the strainer holder while sliding it forwardFlush the strainer and hose thoroughly with fresh water to clean itCheck
the strainer for cracks or other damageCheck the hoses for cracks, deterioration or loose connectionsAlso check that they
are not kinked or pinchedDo not clear the Clean the breather hole in the bilge joint with combreather hole with pressed airneedle