2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 186Get this manual

2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 186

FUEL SYSTEM (Programmed Fuel Injection) 2EOP (High) Switch Line Open circuit Inspection Pull the safety lanyard lock clip
DTC 61-2 (EOP (HIGH) SWITCH) 1Engine Oil Pressure Inspection Inspect the engine oil pressure (page 6-61 Is the oil pressure
corrected? - GO TO STEP 2- Inspect the lubrication system (page 6-51 2EOP (High) switch Inspection Replace the EOP (High)
switch with known good one (page 8-90)Reset the ECM (page 8-17)Start the engine according to the flushing procedure (page
5-3) at turn on the water and engine speed above 4,200 rpm for seconds or moreCheck the EOP (High) switch with the HDS Is
the DTC 61- indicated? - Replace the ECM with known good one, and recheck - Faulty original EOP (High) switch Page: 186 2008