2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 276Get this manual

2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 276

CYLINDER HEADIVALVE Be careful not to Turn the crankshaft clockwise one full turn (360 drop the cam and remove the cam sprocket
cylinder head surface and facing outward as shownRemove the cam sprocket bolts from the camshaftsRemove the cam sprockets
from the camshaftsSuspend thechain with piece of wire to prevent the chain from falling into the crankcase INDEX MARK INSTALLATION
Install the cam sprockets onto each camshaft so the No4 cam lobe is positioned between the "IN" and "EX" timing marks on