2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 305Get this manual

2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 305

OIL CLEARANCE INSPECTION Do not rotate the crankshaft during inspectionClean off any oil from the bearing insetts and crankpin,
steps alternately TORQUE: 46 Nmm kgf.m, 34 lbf.ft) (4.7 Remove the nuts and bearing capsMeasure the compressed plastigauge
at its widest point on the crankpin to determine the oil clearance SERVICE LIMIT 0.06 mm (0.002 in) If the oil clearance
exceeds the service limit, select the correct replacement bearings BEARING SELECTION The numbers Record the connecting rod