2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 309Get this manual

2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 309

Measure the connecting rod small end I.D SERVICE LIMIT 22.061 rnrn (0.8685 in) Calculate the connecting rod-to-piston pin
rnrn (3.114 in) Calculate the cylinder-to-piston clearance STANDARD: 0.0100.045 rnrn (0.00040.0018 in) Calculate the cylinder
taper and out-of-round at three levels in an and axisTake the maximum reading to determine the taper and out-of-round SERVICE
LIMITS: Taper: 0.10 rnrn (0.004 in) Out-of-round: 0.10 mm (0.004 in) The cylinder must be rebored and an oversize piston
(0.50fitted if the service limits are exceededThe cylinder must be rebored so the clearance is 0.0100.045 (0.00040.0018 in)