2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 370Get this manual

2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 370

STEERINGIREVERSE SYSTEM STEERING SHAFT INSTALLATION Apply water resistant molybdenum disulfide grease the sliding surfaces
nuts with the washers and tighten them to the specified torqueSTEERING SHAFT TORQUE: N-m (0.71 kgf-m, 5.2 Ibf-ft) Apply water
resistant molybdenum disulfide grease to the limit switch lever pivotPosition the steering shaft straight aheadInstall the
cable arm by aligning its lug with the groove in the steering shaft while holding the limit switch lever SWITCH LEVER Page: