2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 420Get this manual

2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 420

OUTPUT CIRCUIT INSPECTION LIMIT MODE Remove the front storage box (page 3-5)Release the wire bandDisconnect the combination
WARNING BUZZER Remove the front storage box (page 3-5)Release the wire bandDisconnect the combination meter 10P (gray) connector
Insert the safety lanyard lock clip in engine stop switchConnect the Greenyellow and Green wire terminals of the 10P (Gray)
connector with jumper wireThe warning buzzer should soundIf the warning buzzer does not sound, check the power input line
(page 19-5)If the power input line is normal, check the following:open circuit in the Greenlyellow wire between the combination
meter and warning buzzerfaulty warning buzzeropen circuit in the Redlyellow wire between the warning buzzer and junction