2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 421Get this manual

2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 421

ECM LOCK Remove the front storage box (page 3-5)Release the wire bandDisconnect the combination meter 10P (gray) connector
Remove the front storage box (page 3-5)Release the wire bandDisconnect the combination meter 8P (gray) and 10P (gray) connector
CONNECTOR Connect the Light greenlblack and Green wire terminals of the 10P (Gray) connector with jumper wireInsert the safety
lanyard lock clip in engine stop switchMeasure the voltage between the Pink (+) wire terminal of the 8P (Gray) connector
and Green (-) wire terminal of the 10P (Gray) connectorThere should be approximately VIf there is no voltage, check for an
open circuit in the Pink wire between the combination meter and ECM CONNECTOR :OMBINATION METER 10P (Gray) and 8P (Gray)