1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 77Get this manual

1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 77

MAINTENANCETUNE UP Cooling System MaintenanceStorage Cooling System Flushing and Salt Water Maintenance When the watercraft
when the engine is runningSevere personal injury or death could result Flushing Procedure 1992 Models A flush kit must be
installed to flush the engine on 1992 modelsFollow installation instructions provided with the kit 1Remove cap from flush
kit coupler on water "in" line2Connect water (garden) hose to couplerDo not turn on water tap yet3Start engine and immediately
(within 10 seconds) open water tap4Run engine at fast idle for one minuteRev engine intermittently for one minuteDo not run
for over three minutes at time or overheating of drive line components may resultRinse engine externally with fresh water
5Turn off water tap first, then immediately stop engine6Disconnect water hose from coupler and reinstall cap 7Wipe off any