1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 220Get this manual

1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 220

FUEL SYSTEMCARBURETION Reed Valve Removal Mikuni Carburetor Reed Valve Removal, 19921993 Models 1Each cylinder has its own
inlet lines and plug to prevent fuel spillsSee fuel warnings on page 3.61Remove choke and throttle cables from carb assemblyRemove
fuel return line and plug NOTE: 1995 production units will require disconnecting oil injection lines from intake base prior
to base removalWhen intake base has been removed, disconnect oil pump linkage rod from carb rack, and pivot the rod out of
the wayIf engine is to be removed, it will be necessary to remove linkage rod from oil pump arm to prevent bending arm and
altering oil calibration3Remove (6) flange nuts securing carb rack assembly to intake manifold and remove carb rackRemove
(12) intake manifold bolts and (6) intake manifold flange nutsRemove manifoldInspect all gaskets and mating surfaces for