1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 291Get this manual

1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 291

ENGINECOOLING Disassembly Inspection780cc Models 5 Loosen 6mm bolt, 8mm bolts (16), and 10mm bolts (4) from the crankcase
pins, and crankcase alignment dowel pins8 Remove crankshaft and clean crankcase sealing surfaces thoroughly to remove all
old sealer 9 Remove seals, a-ring, and spacer from PTa end of crank shaftRemove seal from Magneto endNOTE: The metal sides
of the PTa end seals face each otherThe innermost seal has an outer rib to fit into the groove in the crankcaseAlways replace